The first hand now assembles and moves by hand.

Inspect the mechanism before printing

Controlling dimensions and print plate

Download the physical handoff

Manual build traveler

Checkboxes are a browser convenience only; they are not engineering evidence. The CSV traveler must be completed and signed separately.

• CONFIGURATION — Record commit, ZIP/STL hashes, printer, slicer, material lot and operator before slicing
• CALIBRATION — Print the clearance coupon before mechanism parts
• SLICE — Slice the eleven-part plate at 100% and inspect support, adhesion, collision and estimated time
• PRINT — Print, separate and label all eleven parts
• INSPECT — Measure frame, rod, hole and moving-part characteristics in the inspection register
• FRAME — Dry-assemble the two plates, bridges and end blocks with recorded M3 candidates
• GUIDES — Install measured smooth rods or printed proxies and temporary collars
• MOVERS — Install both fused finger/rack/pad proxies on both rods
• PINION — Insert the manual pinion shaft through the frame and engage both racks
• KINEMATICS — Move from closed to open and measure both jaw travels and pad gaps
• CYCLING — Perform 50 slow hand-driven open/close cycles with no object
• DISPOSITION — Photograph four views and quarantine or accept only as a development fit article

What remains open