31
profile members
Main frame, doors, platform and cradle have exact cut lengths.
39
defined joints
Every modeled frame/door joint names its candidate purchased hardware.
0
released proof loads
Dynamic, guard, anchor, door and tether loads still require physical inputs.
Complete cell assembly
What this changes
Framed doors
Each clear infill is captured by four 40 mm profiles and carried by three profile-to-profile hinges. Magnetic catches receive no protective-interlock credit.
Anchored base intent
Caster hardware is rejected for E7. Four floor-mount interfaces and eight anchor locations are visible; exact anchors remain site-dependent.
Calculated honestly
The profile-only cradle screen uses the entire robot weight on one arm. No equal-sharing or arbitrary impact multiplier is credited.
Profile cut list
| Member Id | Subsystem | Role | Candidate Profile | Center X Mm | Center Y Mm | Center Z Mm | Size X Mm | Size Y Mm | Size Z Mm | Cut Length Mm | Quantity | End Preparation | Joint Ids | Cut Released | Warning |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MF-BXF | MAIN FRAME | BASE FRONT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 0 | -480 | 20 | 1200 | 40 | 40 | 1200 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-BXR | MAIN FRAME | BASE REAR | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 0 | 480 | 20 | 1200 | 40 | 40 | 1200 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-BYL | MAIN FRAME | BASE LEFT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | -580 | 0 | 20 | 40 | 920 | 40 | 920 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-BYR | MAIN FRAME | BASE RIGHT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 580 | 0 | 20 | 40 | 920 | 40 | 920 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-UFL | MAIN FRAME | UPRIGHT FRONT LEFT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | -580 | -480 | 700 | 40 | 40 | 1360 | 1360 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-UFR | MAIN FRAME | UPRIGHT FRONT RIGHT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 580 | -480 | 700 | 40 | 40 | 1360 | 1360 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-URL | MAIN FRAME | UPRIGHT REAR LEFT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | -580 | 480 | 700 | 40 | 40 | 1360 | 1360 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-URR | MAIN FRAME | UPRIGHT REAR RIGHT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 580 | 480 | 700 | 40 | 40 | 1360 | 1360 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-TXF | MAIN FRAME | TOP FRONT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 0 | -480 | 1380 | 1200 | 40 | 40 | 1200 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-TXR | MAIN FRAME | TOP REAR | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 0 | 480 | 1380 | 1200 | 40 | 40 | 1200 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-TYL | MAIN FRAME | TOP LEFT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | -580 | 0 | 1380 | 40 | 920 | 40 | 920 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-TYR | MAIN FRAME | TOP RIGHT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 580 | 0 | 1380 | 40 | 920 | 40 | 920 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| MF-TC | MAIN FRAME | ZERO-CREDIT TETHER CROSSBAR | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 0 | 0 | 1360 | 1120 | 40 | 40 | 1120 | 1 | SQUARE CUT | SEE FRAME-JOINT-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| DR-L-VO | DOOR L | OUTER STILE | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | -532 | -457 | 700 | 40 | 40 | 1280 | 1280 | 1 | SQUARE CUT + ANCHOR COUNTERBORES | DOOR-ANCHOR JOINTS | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| DR-L-VI | DOOR L | INNER STILE | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | -26 | -457 | 700 | 40 | 40 | 1280 | 1280 | 1 | SQUARE CUT + ANCHOR COUNTERBORES | DOOR-ANCHOR JOINTS | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| DR-L-HB | DOOR L | BOTTOM RAIL | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | -279 | -457 | 80 | 466 | 40 | 40 | 466 | 1 | SQUARE CUT | DOOR-ANCHOR JOINTS | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| DR-L-HT | DOOR L | TOP RAIL | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | -279 | -457 | 1320 | 466 | 40 | 40 | 466 | 1 | SQUARE CUT | DOOR-ANCHOR JOINTS | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| DR-R-VO | DOOR R | OUTER STILE | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 26 | -457 | 700 | 40 | 40 | 1280 | 1280 | 1 | SQUARE CUT + ANCHOR COUNTERBORES | DOOR-ANCHOR JOINTS | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| DR-R-VI | DOOR R | INNER STILE | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 532 | -457 | 700 | 40 | 40 | 1280 | 1280 | 1 | SQUARE CUT + ANCHOR COUNTERBORES | DOOR-ANCHOR JOINTS | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| DR-R-HB | DOOR R | BOTTOM RAIL | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 279 | -457 | 80 | 466 | 40 | 40 | 466 | 1 | SQUARE CUT | DOOR-ANCHOR JOINTS | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| DR-R-HT | DOOR R | TOP RAIL | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 279 | -457 | 1320 | 466 | 40 | 40 | 466 | 1 | SQUARE CUT | DOOR-ANCHOR JOINTS | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PF-XF | SUPPORT/CRADLE | PLATFORM FRONT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 0 | -310 | 50 | 620 | 40 | 40 | 620 | 1 | SQUARE CUT + JOINT-SPECIFIC MACHINING | SEE CRADLE-HARDWARE-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PF-XR | SUPPORT/CRADLE | PLATFORM REAR | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 0 | 310 | 50 | 620 | 40 | 40 | 620 | 1 | SQUARE CUT + JOINT-SPECIFIC MACHINING | SEE CRADLE-HARDWARE-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PF-YL | SUPPORT/CRADLE | PLATFORM LEFT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | -310 | 0 | 50 | 40 | 580 | 40 | 580 | 1 | SQUARE CUT + JOINT-SPECIFIC MACHINING | SEE CRADLE-HARDWARE-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PF-YR | SUPPORT/CRADLE | PLATFORM RIGHT | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 310 | 0 | 50 | 40 | 580 | 40 | 580 | 1 | SQUARE CUT + JOINT-SPECIFIC MACHINING | SEE CRADLE-HARDWARE-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| CR-BASE | SUPPORT/CRADLE | CRADLE BASE CROSSMEMBER | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 0 | 185 | 90 | 400 | 40 | 40 | 400 | 1 | SQUARE CUT + JOINT-SPECIFIC MACHINING | SEE CRADLE-HARDWARE-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| CR-POST-L | SUPPORT/CRADLE | CRADLE LEFT POST | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | -95 | 185 | 290 | 40 | 40 | 400 | 400 | 1 | SQUARE CUT + JOINT-SPECIFIC MACHINING | SEE CRADLE-HARDWARE-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| CR-POST-R | SUPPORT/CRADLE | CRADLE RIGHT POST | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 95 | 185 | 290 | 40 | 40 | 400 | 400 | 1 | SQUARE CUT + JOINT-SPECIFIC MACHINING | SEE CRADLE-HARDWARE-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| CR-ARM-L | SUPPORT/CRADLE | CRADLE LEFT CANTILEVER | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | -70 | 95 | 510 | 40 | 220 | 40 | 220 | 1 | SQUARE CUT + JOINT-SPECIFIC MACHINING | SEE CRADLE-HARDWARE-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| CR-ARM-R | SUPPORT/CRADLE | CRADLE RIGHT CANTILEVER | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 70 | 95 | 510 | 40 | 220 | 40 | 220 | 1 | SQUARE CUT + JOINT-SPECIFIC MACHINING | SEE CRADLE-HARDWARE-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| CR-BRACE | SUPPORT/CRADLE | CRADLE POST CROSS-BRACE | 80/20 40-4040-Lite; 40 x 40 mm; 6063-T6 | 0 | 185 | 450 | 230 | 40 | 40 | 230 | 1 | SQUARE CUT + JOINT-SPECIFIC MACHINING | SEE CRADLE-HARDWARE-REGISTER | NO - DFM/FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
Frame and door joints
| Joint Id | Subsystem | Location | Members | Candidate Joint Hardware | Fastener Set | Joint Capacity Released | Inspection | Warning |
|---|---|---|---|---|---|---|---|---|
| J-MF-BFL-X | MAIN FRAME | B FL X-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-BFL-Y | MAIN FRAME | B FL Y-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-BFR-X | MAIN FRAME | B FR X-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-BFR-Y | MAIN FRAME | B FR Y-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-BRL-X | MAIN FRAME | B RL X-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-BRL-Y | MAIN FRAME | B RL Y-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-BRR-X | MAIN FRAME | B RR X-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-BRR-Y | MAIN FRAME | B RR Y-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-TFL-X | MAIN FRAME | T FL X-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-TFL-Y | MAIN FRAME | T FL Y-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-TFR-X | MAIN FRAME | T FR X-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-TFR-Y | MAIN FRAME | T FR Y-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-TRL-X | MAIN FRAME | T RL X-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-TRL-Y | MAIN FRAME | T RL Y-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-TRR-X | MAIN FRAME | T RR X-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-MF-TRR-Y | MAIN FRAME | T RR Y-PLANE | THREE-MEMBER CORNER; SEE PROFILE CUT LIST | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-TETHER-L | ZERO-CREDIT TETHER CROSSBAR | L | MF-TC TO TOP SIDE RAIL | 1 x 80/20 40-4338 | 8 x 75-3422 | NO | FULL SEATING; TORQUE MARK; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-TETHER-R | ZERO-CREDIT TETHER CROSSBAR | R | MF-TC TO TOP SIDE RAIL | 1 x 80/20 40-4338 | 8 x 75-3422 | NO | FULL SEATING; TORQUE MARK; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-DR-L-OB | DOOR L | O B | DOOR STILE TO RAIL | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-DR-L-OT | DOOR L | O T | DOOR STILE TO RAIL | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-DR-L-IB | DOOR L | I B | DOOR STILE TO RAIL | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-DR-L-IT | DOOR L | I T | DOOR STILE TO RAIL | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-DR-R-OB | DOOR R | O B | DOOR STILE TO RAIL | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-DR-R-OT | DOOR R | O T | DOOR STILE TO RAIL | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-DR-R-IB | DOOR R | I B | DOOR STILE TO RAIL | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-DR-R-IT | DOOR R | I T | DOOR STILE TO RAIL | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-PF-FL | FOOT PLATFORM SUBFRAME | FL | PF-X MEMBER TO PF-Y MEMBER | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-PF-FR | FOOT PLATFORM SUBFRAME | FR | PF-X MEMBER TO PF-Y MEMBER | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-PF-RL | FOOT PLATFORM SUBFRAME | RL | PF-X MEMBER TO PF-Y MEMBER | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-PF-RR | FOOT PLATFORM SUBFRAME | RR | PF-X MEMBER TO PF-Y MEMBER | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-CR-L-POST-BASE | PELVIS CRADLE | L POST-BASE | 40-4040-LITE CRADLE MEMBERS | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-CR-L-ARM-POST | PELVIS CRADLE | L ARM-POST | 40-4040-LITE CRADLE MEMBERS | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-CR-R-POST-BASE | PELVIS CRADLE | R POST-BASE | 40-4040-LITE CRADLE MEMBERS | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-CR-R-ARM-POST | PELVIS CRADLE | R ARM-POST | 40-4040-LITE CRADLE MEMBERS | 1 x 80/20 40-4338 8-hole gusseted inside bracket | 8 x 80/20 75-3422 M8 x 16 BHSCS/T-NUT ASSEMBLY | NO | FULL SEATING; TORQUE MARK; NO GAP; FAI REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-CR-L-BRACE | PELVIS CRADLE | L CROSS-BRACE END | CR-BRACE TO CR-POST | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-CR-R-BRACE | PELVIS CRADLE | R CROSS-BRACE END | CR-BRACE TO CR-POST | 1 x 80/20 40-3897 M8 ANCHOR FASTENER ASSEMBLY | INCLUDED M8 x 30 SHCS; COUNTERBORE REQUIRED | NO | COUNTERBORE/ACCESS HOLE FAI; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-PF-PLATE | FOOT PLATFORM | PLATE TO SUBFRAME | 700 x 700 x 18 PLATE TO FOUR PF PROFILES | 8 x 80/20 75-3422 CANDIDATE THROUGH CONTROLLED PLATE HOLES | 8 x M8 BHSCS/T-NUT ASSEMBLY; LENGTH/HOLE DETAIL DFM REQUIRED | NO | HOLE POSITION/EDGE DISTANCE/FLATNESS/SEATING FAI | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-CR-PADPLATE-L | PELVIS CRADLE | L PAD PLATE | CUSTOM PAD PLATE TO CRADLE ARM | 4 x M8 BHSCS/T-NUT CANDIDATE | 4 x 75-3422 CANDIDATE; PLATE HOLES/EDGE DISTANCE DFM REQUIRED | NO | PLATE FAI; FULL SEATING; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| J-CR-PADPLATE-R | PELVIS CRADLE | R PAD PLATE | CUSTOM PAD PLATE TO CRADLE ARM | 4 x M8 BHSCS/T-NUT CANDIDATE | 4 x 75-3422 CANDIDATE; PLATE HOLES/EDGE DISTANCE DFM REQUIRED | NO | PLATE FAI; FULL SEATING; TORQUE MARK | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
Door hardware
| Hardware Id | Door | Role | Candidate | Quantity | Mounting | Safety Interlock Credit | Capacity Credit | Warning |
|---|---|---|---|---|---|---|---|---|
| HG-L-1 | L | PROFILE-TO-PROFILE HINGE | 80/20 12088 SLOTTED ZINC HINGE; 250 N m PUBLISHED MAX LOAD | 1 | 4 x 75-3627 M8 x 18 CANDIDATE; VERIFY CURRENT PRODUCT CONFIGURATION | NONE | NONE UNTIL DOOR LOAD/JOINERY REVIEW | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| HG-L-2 | L | PROFILE-TO-PROFILE HINGE | 80/20 12088 SLOTTED ZINC HINGE; 250 N m PUBLISHED MAX LOAD | 1 | 4 x 75-3627 M8 x 18 CANDIDATE; VERIFY CURRENT PRODUCT CONFIGURATION | NONE | NONE UNTIL DOOR LOAD/JOINERY REVIEW | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| HG-L-3 | L | PROFILE-TO-PROFILE HINGE | 80/20 12088 SLOTTED ZINC HINGE; 250 N m PUBLISHED MAX LOAD | 1 | 4 x 75-3627 M8 x 18 CANDIDATE; VERIFY CURRENT PRODUCT CONFIGURATION | NONE | NONE UNTIL DOOR LOAD/JOINERY REVIEW | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| HD-L | L | HANDLE | 80/20 40-2060; 179 mm GLASS-FILLED NYLON HANDLE | 1 | CURRENT PRODUCT HARDWARE SET; RECEIPT/DFM VERIFY | NONE | ERGONOMIC HANDLE ONLY | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| CT-L | L | POSITION CATCH | 80/20 65-2090 MAGNETIC CATCH; PUBLISHED 12 lb / 5.443 kg PULL | 1 | 65-2745 BRACKET WHERE REQUIRED; VERIFY FIT | NONE - NOT A PROTECTIVE INTERLOCK | DOOR POSITION RETENTION ONLY; VALIDATION OPEN | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| HG-R-1 | R | PROFILE-TO-PROFILE HINGE | 80/20 12088 SLOTTED ZINC HINGE; 250 N m PUBLISHED MAX LOAD | 1 | 4 x 75-3627 M8 x 18 CANDIDATE; VERIFY CURRENT PRODUCT CONFIGURATION | NONE | NONE UNTIL DOOR LOAD/JOINERY REVIEW | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| HG-R-2 | R | PROFILE-TO-PROFILE HINGE | 80/20 12088 SLOTTED ZINC HINGE; 250 N m PUBLISHED MAX LOAD | 1 | 4 x 75-3627 M8 x 18 CANDIDATE; VERIFY CURRENT PRODUCT CONFIGURATION | NONE | NONE UNTIL DOOR LOAD/JOINERY REVIEW | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| HG-R-3 | R | PROFILE-TO-PROFILE HINGE | 80/20 12088 SLOTTED ZINC HINGE; 250 N m PUBLISHED MAX LOAD | 1 | 4 x 75-3627 M8 x 18 CANDIDATE; VERIFY CURRENT PRODUCT CONFIGURATION | NONE | NONE UNTIL DOOR LOAD/JOINERY REVIEW | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| HD-R | R | HANDLE | 80/20 40-2060; 179 mm GLASS-FILLED NYLON HANDLE | 1 | CURRENT PRODUCT HARDWARE SET; RECEIPT/DFM VERIFY | NONE | ERGONOMIC HANDLE ONLY | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| CT-R | R | POSITION CATCH | 80/20 65-2090 MAGNETIC CATCH; PUBLISHED 12 lb / 5.443 kg PULL | 1 | 65-2745 BRACKET WHERE REQUIRED; VERIFY FIT | NONE - NOT A PROTECTIVE INTERLOCK | DOOR POSITION RETENTION ONLY; VALIDATION OPEN | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| DI-01 | BOTH | PROTECTIVE DOOR INTERLOCK | SELECTION REQUIRED | 2 | CODE/HAZARD-ASSESSMENT DEPENDENT | NONE | NOT SELECTED OR VALIDATED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
Panel schedule
| Panel Id | Role | Center Xyz Mm | Finished Size Xyz Mm | Candidate Material | Edge Finish | Mounting | Impact Containment Credit | Door Interlock Credit | Fabrication Release | Warning |
|---|---|---|---|---|---|---|---|---|---|---|
| PN-L | FIXED LEFT | [-557, 0, 720] | [6, 880, 1280] | SABIC LEXAN 9030 OR 9034; 6 mm; EXACT GRADE SELECTION REQUIRED | DEBUR; NO SHARP EDGES; SHOP DRAWING/DFM REQUIRED | CAPTURED IN MAIN-FRAME SLOTS | NONE | NONE | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PN-R | FIXED RIGHT | [557, 0, 720] | [6, 880, 1280] | SABIC LEXAN 9030 OR 9034; 6 mm; EXACT GRADE SELECTION REQUIRED | DEBUR; NO SHARP EDGES; SHOP DRAWING/DFM REQUIRED | CAPTURED IN MAIN-FRAME SLOTS | NONE | NONE | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PN-REAR | FIXED REAR | [0, 457, 720] | [1090, 6, 1280] | SABIC LEXAN 9030 OR 9034; 6 mm; EXACT GRADE SELECTION REQUIRED | DEBUR; NO SHARP EDGES; SHOP DRAWING/DFM REQUIRED | CAPTURED IN MAIN-FRAME SLOTS | NONE | NONE | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PN-ROOF | FIXED ROOF | [0, 0, 1357] | [1090, 880, 6] | SABIC LEXAN 9030 OR 9034; 6 mm; EXACT GRADE SELECTION REQUIRED | DEBUR; NO SHARP EDGES; SHOP DRAWING/DFM REQUIRED | CAPTURED IN MAIN-FRAME SLOTS | NONE | NONE | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PN-DL | LEFT DOOR INFILL | [-279, -434, 700] | [466, 6, 1200] | SABIC LEXAN 9030 OR 9034; 6 mm; EXACT GRADE SELECTION REQUIRED | DEBUR; NO SHARP EDGES; SHOP DRAWING/DFM REQUIRED | CAPTURED IN FRAMED DOOR | NONE | NONE | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PN-DR | RIGHT DOOR INFILL | [279, -434, 700] | [466, 6, 1200] | SABIC LEXAN 9030 OR 9034; 6 mm; EXACT GRADE SELECTION REQUIRED | DEBUR; NO SHARP EDGES; SHOP DRAWING/DFM REQUIRED | CAPTURED IN FRAMED DOOR | NONE | NONE | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
Base and anchoring interfaces
| Base Id | Candidate | Purchased Part Geometry | Profile Fasteners | Floor Anchor Quantity | Floor Anchor | Leveling | Anchorage Capacity Credit | Caster Permitted For E7 | Warning |
|---|---|---|---|---|---|---|---|---|---|
| BP-FL | 80/20 40-2400 FLOOR MOUNT PLATE | DIMENSIONED INTERFACE ENVELOPE ONLY; USE MANUFACTURER CAD/RECEIVED PART | 4-8 x 75-3500 OR 75-3422 PER FINAL CONFIGURATION | 2 | SELECTION REQUIRED AFTER SUBSTRATE SURVEY | SHIM/GROUT/LEVELING PROCEDURE SELECTION REQUIRED | NONE | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| BP-FR | 80/20 40-2400 FLOOR MOUNT PLATE | DIMENSIONED INTERFACE ENVELOPE ONLY; USE MANUFACTURER CAD/RECEIVED PART | 4-8 x 75-3500 OR 75-3422 PER FINAL CONFIGURATION | 2 | SELECTION REQUIRED AFTER SUBSTRATE SURVEY | SHIM/GROUT/LEVELING PROCEDURE SELECTION REQUIRED | NONE | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| BP-RL | 80/20 40-2400 FLOOR MOUNT PLATE | DIMENSIONED INTERFACE ENVELOPE ONLY; USE MANUFACTURER CAD/RECEIVED PART | 4-8 x 75-3500 OR 75-3422 PER FINAL CONFIGURATION | 2 | SELECTION REQUIRED AFTER SUBSTRATE SURVEY | SHIM/GROUT/LEVELING PROCEDURE SELECTION REQUIRED | NONE | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| BP-RR | 80/20 40-2400 FLOOR MOUNT PLATE | DIMENSIONED INTERFACE ENVELOPE ONLY; USE MANUFACTURER CAD/RECEIVED PART | 4-8 x 75-3500 OR 75-3422 PER FINAL CONFIGURATION | 2 | SELECTION REQUIRED AFTER SUBSTRATE SURVEY | SHIM/GROUT/LEVELING PROCEDURE SELECTION REQUIRED | NONE | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
Structural load cases
| Case Id | Case | Input | Resultant N | Status | Acceptance | Warning |
|---|---|---|---|---|---|---|
| LC-01 | ROBOT GRAVITY - ONE CRADLE ARM CARRIES FULL ROBOT WEIGHT | mass=9.831 kg; g=9.80665 m/s2; no two-arm load-sharing credit | 96.4092 | CALCULATED PROFILE-ONLY SCREEN | NO SYSTEM ACCEPTANCE; JOINT/PAD/BASE LOAD PATH OPEN | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| LC-02 | ROBOT GRAVITY - FOOT PLATFORM | mass=9.831 kg; actual support distribution unmeasured | 96.4092 | LOAD DEFINED; PLATE/SUBFRAME/JOINT CALCULATION OPEN | SELECTION REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| LC-03 | ROBOT CONTACT/IMPACT ON GUARD | APPROACH SPEED, EFFECTIVE INERTIA, CONTACT LOCATION AND FORCE-STROKE MISSING | SELECTION REQUIRED | NOT CALCULATED | REQUIRES ENERGY-BASED LOAD + GUARD ANALYSIS/TEST | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| LC-04 | CELL TIP/RACK/ANCHOR LOAD | FLOOR SUBSTRATE, EXTERNAL FORCE, APPLICATION HEIGHT, CELL MASS/COM MISSING | SELECTION REQUIRED | NOT CALCULATED | SITE SURVEY + STRUCTURAL DESIGN REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| LC-05 | SECONDARY TETHER / POWER-LOSS COLLAPSE | TETHER SLACK, ROBOT TRAJECTORY, FORCE-STROKE, ANCHOR LOAD MISSING | SELECTION REQUIRED | NOT CALCULATED | NO FALL-ARREST CREDIT | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| LC-06 | DOOR SELF-WEIGHT / OPERATOR LOAD | AS-BUILT DOOR MASS, HINGE SPACING, ABUSE LOAD MISSING | SELECTION REQUIRED | NOT CALCULATED | HINGE/FRAME/JOINT VALIDATION REQUIRED | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
Completed calculation
| Screen Id | Component | Load Case | Model | Source Inputs | Bending Moment N Mm | Bending Stress Mpa | Tip Deflection Mm | Yield Ratio Using 172 37 Mpa | Credit | Warning |
|---|---|---|---|---|---|---|---|---|---|---|
| SC-01 | ONE 40-4040-LITE CRADLE ARM | LC-01 | PRISMATIC CANTILEVER; L=165 mm; FULL ROBOT WEIGHT ON ONE ARM | I=9.3983 cm4; E=68947.6 N/mm2; c=20 mm | 15907.514 | 3.38519 | 0.022278 | 50.919 | PROFILE ELASTIC SCREEN ONLY; NO JOINT/PAD/SYSTEM CAPACITY CREDIT | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
Proof plan
| Proof Id | Item | Prerequisite | Proof Load | Method | State | Authority | Warning |
|---|---|---|---|---|---|---|---|
| PT-01 | MAIN FRAME JOINTS/RACKING | APPROVED LOAD CASE, JOINT PROCEDURE, FLOOR ANCHORS, INSTRUMENTS | SELECTION REQUIRED; DO NOT INVENT FROM CATALOG PART LOADS | QUALIFIED STATIC LOAD AT DEFINED HEIGHT/DIRECTION; MEASURE RACK/SLIP/SET | NOT EXECUTED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PT-02 | PELVIS CRADLE/PLATFORM | PAD FORCE-STROKE, JOINT DESIGN, ACCEPTED DESIGN LOAD/FACTOR | SELECTION REQUIRED | INSTRUMENTED VERTICAL/LATERAL LOAD; INSPECT SLIP/SET/DAMAGE | NOT EXECUTED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PT-03 | PANELS/DOORS/RETENTION | ENERGY-BASED CONTACT LOAD, RETAINER DESIGN, DOOR LOAD CASE | SELECTION REQUIRED | REPRESENTATIVE PANEL/DOOR COUPON THEN ASSEMBLY PROOF/IMPACT TEST | NOT EXECUTED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PT-04 | FLOOR ANCHORAGE/TIP | SUBSTRATE SURVEY, ANCHOR SELECTION, APPROVED INSTALLATION PROCEDURE | SELECTION REQUIRED | INSTALLATION INSPECTION + QUALIFIED PULL/SHEAR OR CODE-DEFINED ACCEPTANCE | NOT EXECUTED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| PT-05 | SECONDARY TETHER PATH | DYNAMIC LOAD, HARDWARE, ANCHORS, SLACK, EVENT DEFINITION | SELECTION REQUIRED | SEPARATE GUARDED PROOF; NO ROBOT AS TEST MASS UNTIL APPROVED | NOT EXECUTED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
Selections still required
| Selection Id | Item | Missing Evidence | Closure Evidence | State | Work Authority | Warning |
|---|---|---|---|---|---|---|
| SEL-01 | FLOOR SUBSTRATE AND ANCHORS | SLAB MATERIAL/THICKNESS/REINFORCEMENT/EDGE DISTANCE; SITE JURISDICTION; ANCHOR LOADS | SITE SURVEY + QUALIFIED ANCHOR DESIGN | SELECTION REQUIRED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| SEL-02 | GUARD IMPACT LOAD AND POLYCARBONATE GRADE | ROBOT EFFECTIVE INERTIA/SPEED/CONTACT; SPAN/EDGE CONDITION; GRADE CERTIFICATE | ENERGY MODEL + PANEL/RETENTION ANALYSIS AND TEST | SELECTION REQUIRED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| SEL-03 | PELVIS PAD SYSTEM | FORCE-STROKE, HARDNESS, TEMPERATURE/AGING, RETENTION, CONTACT PRESSURE | COUPON + ASSEMBLY TEST | SELECTION REQUIRED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| SEL-04 | CRADLE/FRAME JOINT CAPACITY | EXACT PRELOAD/TORQUE; FRICTION; SLIP/PRYING; RECEIVED HARDWARE | JOINT CALCULATION + PROOF | SELECTION REQUIRED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| SEL-05 | DOOR PROTECTIVE INTERLOCK | HAZARD-BASED SAFETY FUNCTION/PLr; DEVICE/ACTUATOR; DEFEAT RESISTANCE | SAFETY DESIGN + VALIDATION | SELECTION REQUIRED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| SEL-06 | SECONDARY TETHER SYSTEM | SLACK, DYNAMIC LOAD, TERMINATIONS, ANCHORS, INSPECTION/LIFE | DYNAMIC ANALYSIS + QUALIFIED PROOF | SELECTION REQUIRED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| SEL-07 | PLATFORM MATERIAL/FASTENERS | PLATE MATERIAL, FLATNESS, FASTENERS, FOOT FRICTION/RETENTION | DFM + STATIC/SLIP TEST | SELECTION REQUIRED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| SEL-08 | DOOR LOAD AND HINGE CONFIGURATION | AS-BUILT MASS, OPERATOR/ABUSE LOAD, HINGE FASTENERS, SAG LIMIT | DOOR CALCULATION + CYCLE/PROOF TEST | SELECTION REQUIRED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| SEL-09 | FRAME RACK/TIP LOAD | CELL MASS/COM, EXTERNAL FORCE/HEIGHT, ROBOT FAULT LOAD, FLOOR CONDITION | STRUCTURAL MODEL + SITE PROOF | SELECTION REQUIRED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| SEL-10 | FASTENER TORQUE/LOCKING/INSPECTION | CURRENT MANUFACTURER DATA, LUBRICATION, REUSE, MARKING, RETORQUE | QUALIFIED ASSEMBLY PROCEDURE | SELECTION REQUIRED | NONE | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
Candidate BOM
| Item Id | Item | Manufacturer | Candidate Part Or Family | Quantity | Selection State | Procurement Released | Warning |
|---|---|---|---|---|---|---|---|
| B-01 | 40-4040-Lite profile | 80/20 | 40-4040-Lite | 31 | CUT LIST CONTROLS LENGTH; DFM/QUOTE REQUIRED | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-02 | 8-hole gusseted inside bracket | 80/20 | 40-4338 | 22 | MAIN FRAME/CROSSBAR/CRADLE CANDIDATE | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-03 | M8 x 16 bracket/interface fastener/T-nut assemblies | 80/20 | 75-3422 | 192 | 176 BRACKET + 16 CUSTOM INTERFACE; TORQUE/LENGTH PROCEDURE OPEN | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-04 | M8 anchor fastener assembly | 80/20 | 40-3897 | 14 | DOOR, PLATFORM AND CRADLE-BRACE JOINTS; MACHINING REQUIRED | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-05 | slotted zinc hinge | 80/20 | 12088 | 6 | THREE PER DOOR; CAPACITY VALIDATION OPEN | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-06 | handle | 80/20 | 40-2060 | 2 | ONE PER DOOR | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-07 | magnetic catch | 80/20 | 65-2090 | 2 | ZERO PROTECTIVE-INTERLOCK CREDIT | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-08 | floor mount plate | 80/20 | 40-2400 | 4 | ANCHORS/SUBSTRATE SELECTION REQUIRED | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-09 | 6 mm clear polycarbonate panels | SABIC | LEXAN 9030 OR 9034 - SELECTION REQUIRED | 6 | DIMENSIONS IN PANEL REGISTER; IMPACT VALIDATION OPEN | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-10 | 6 mm panel gasket stock | 80/20 | 40-2120 | 14 | 23984 mm NET LENGTH; CUT/WASTE PLAN REQUIRES DFM | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-11 | platform plate | SELECTION REQUIRED | 700 x 700 x 18 mm | 1 | MATERIAL/FASTENERS/FLATNESS OPEN | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-12 | custom pelvis pad plates | CUSTOM | 58 x 70 x 6 mm | 2 | MATERIAL/HOLES/FINISH DFM REQUIRED | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-13 | compliant pelvis pads | SELECTION REQUIRED | 34 x 26 x 40 mm ENVELOPE | 2 | FORCE-STROKE/RETENTION OPEN | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-14 | protective door interlock set | SELECTION REQUIRED | SELECTION REQUIRED | 2 | SAFETY FUNCTION NOT SELECTED | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |
| B-15 | floor anchor set | SELECTION REQUIRED | SELECTION REQUIRED | 8 | SITE/SUBSTRATE DEPENDENT | NO | PRELIMINARY - UNBUILT FASTENED CELL HARDWARE CANDIDATE - PURCHASED-PART ENVELOPES ARE NOT MANUFACTURING MODELS - NOT A WALKING GANTRY OR RATED FALL-ARREST SYSTEM - NOT APPROVED FOR PROCUREMENT, FABRICATION, ASSEMBLY, CONNECTION, POWERED TESTING, MOTION, WALKING OR ENERGIZATION |