40 x 25
millimetre two-layer board
1.36-1.84 s
TI specified preset timeout range
4 / 8
fixture cable contacts populated
0
safety credit or authorized tests
Routed board
Four-conductor fixture cable
Fail-closed signal boundary
- Contact 3 grounds SAFETY_PERMIT_HARDWIRED.
- Contact 5 carries MOTION_WD_HEARTBEAT through a 1 kOhm series resistor.
- WDO_N and ENOUT terminate only at local pullups and test pads.
- Contacts 4, 6, 7 and 8 are physically empty.
- No actuator connector, PDU or power switching component exists on this board.
Engineering source
Native KiCad project · Native PCB · contact map · BOM · HIL plan · ERC · DRC · open holds