# BPL submission candidate: HR-30 G01 gripper fit plate

PRELIMINARY - UNPOWERED NONSTRUCTURAL FIT-CHECK / RFQ ROUTE ONLY - NOT APPROVED FOR PROCUREMENT, STRUCTURAL FABRICATION, ASSEMBLY, POWERED TESTING, MOTION, OR ENERGIZATION

This is one 1:1 millimetre STL containing nine separated left-gripper parts.
Actual bounds: 134.000 x 118.996 x 14.000 mm.

- Do not scale.
- Intended material: library-standard PLA, color irrelevant.
- Development layer-height candidate: 0.20 mm.
- This is an unpowered dimensional/mechanism fit article with no load credit.
- Library staff must confirm service availability and slice time <=7 hours before accepting it.
- Support, adhesion and printer-specific settings remain the operator's decision; record them with the returned part.

The KBLIC page reviewed on 2026-08-17 says 3D printing is temporarily unavailable.
Do not submit until BPL confirms service has resumed.